Serving Mathis, TX & nearby Open 7 days · Mon–Fri 7AM–8PM Licensed & insured · 90-day warranty (844) 442-1999
Serving Mathis, TX

True Pizza Prep Table Repair in Mathis, TX

Need True pizza prep table repair in Mathis, TX? We find the actual cause, explain it in plain terms, give you a price before we start and back the finished repair with a 90-day parts-and-labor warranty.

  • Upfront quote before work
  • 90-day parts & labor warranty
  • Parts matched to your model
  • Same-day service when available

Request service

Tell us what's wrong. We'll call you back to schedule.

We only use your details to arrange the repair. No spam.

or call now
(844) 442-1999
Licensed & insuredFully insured technicians
90-day warrantyOn parts and labor
Upfront pricingApprove the price first
248 appliance types426 brands serviced
True specialists

Repairing True Pizza Prep Tables

True has made many versions of its pizza prep tables over the years. Our technicians check the model and serial number, review known issues for that model family and test before replacing parts, so you only pay for what is actually needed.

How we repair your True Pizza Prep Table

A pizza prep table is a deep refrigerated table with a wide cutting board, a raised rail for toppings, and a refrigerated base for dough and backup product. Every pizza prep table relies on a compressor, condenser, evaporator, fans and a control board or thermostat working together, plus door gaskets that hold the cold in. A technician starts by measuring cabinet and coil temperatures, checking airflow and defrost operation, then tests electrical parts before ever touching the sealed system.

For restaurants and stores, a warm cooler means spoiled inventory and possible health code problems, so commercial refrigeration calls are treated as priority visits.

True Pizza Prep Table repair at a glance

  • Typical repair cost$150–$450
  • Typical service life10–15 years
  • Warranty on repairs90 days parts & labor
  • QuoteUpfront, before work
  • Same-day visitsWhen available
Call (844) 442-1999
Diagnosis

Common True Pizza Prep Table problems we fix

What usually causes each symptom, and what our technician checks to confirm it.

Compressor overheating

Likely causes
High kitchen temperatures near the ovens combined with a dirty condenser or failing fan.
What our technician checks
Condenser air temperature and compressor amperage are measured.

Topping rail not holding temperature

Likely causes
The rail lid left open in a hot kitchen near ovens, overfilled pans, or a failed rail air fan.
What our technician checks
The technician measures pan temperatures, checks rail airflow and the lid seal, and evaluates heat from nearby ovens.

Condenser clogged with flour

Likely causes
Flour dust drawn into the condenser coil and fan, reducing airflow.
What our technician checks
The coil is inspected and cleaned and fan amperage is measured.

Water in the bottom of the base

Likely causes
A clogged evaporator drain or a failed condensate pan heater.
What our technician checks
The drain is flushed and the pan heater is tested.

Dough freezing in the base

Likely causes
Dough trays stacked against the evaporator outlet, or a thermostat reading too warm.
What our technician checks
The probe is checked with a reference thermometer and tray placement relative to the coil is reviewed.

Cutting board warped or cracked

Likely causes
Heat, moisture and repeated washing distorting the board.
What our technician checks
The board is inspected for fit and replaced if it no longer sits flat.
Before you call

Quick checks you can do safely

  • Close the topping rail lid when not making pizzas.
  • Keep dough trays a few inches away from the evaporator.
  • Brush flour dust off the condenser grille.
  • Make sure the unit is not pushed against the oven.
  • Check the breaker and power switch.

Safety first: Disconnect power before cleaning the condenser, and keep cleaning water away from the electrical compartment.

Still not working?

Call and describe what you see and hear, plus any error code. It helps the technician bring the right parts on the first visit.

(844) 442-1999

Seeing a code? Try our error code lookup or troubleshooting wizard.

How it works

Our 5-step pizza prep table repair process

  1. Call or book onlineTell us the appliance, brand and what it is doing. We confirm a visit window that works for you.
  2. DiagnosisThe technician inspects and tests the pizza prep table to find the actual cause, not just the symptom.
  3. Upfront quoteYou get a clear price before any work starts. No surprise charges.
  4. RepairWe fix it with parts matched to your model, often on the same visit when the part is on the truck.
  5. Test and warrantyWe test the unit under normal operation, clean up and back the repair with a 90-day parts-and-labor warranty.
Pricing

True Pizza Prep Table repair cost and lifespan

Typical repair cost$150–$450
Typical service life10–15 yrs

National ballpark estimates. Your exact price depends on the part and labor, and you get it upfront after diagnosis. On the fence? Try the repair vs replace calculator.

Parts we replace most often

  • Rail fan motor
  • Evaporator fan motor
  • Condenser fan motor
  • Temperature controller
  • Cutting board
  • Lid hinge
  • Door gasket

We match every part to your model and serial number.

Maintenance

Keep your True Pizza Prep Table running longer

  • Brush the condenser weekly where flour is in the air.
  • Sanitize the rail and cutting board daily.
  • Log rail and base temperatures each shift.
  • Keep space between the table and ovens.
  • Inspect the rail lid seal and hinges monthly.

Build a maintenance plan

Create a printable monthly, quarterly and yearly checklist for every appliance in your home.

Open the schedule generator
Local service

True Pizza Prep Table repair in Mathis, TX

Hot summers and sudden cold snaps in Texas put refrigerators, freezers and ice makers in Mathis under heavy load.

We provide pizza prep table repair throughout Mathis, including ZIP code 78368, and in nearby Sandia, Orange Grove and Odem.

Hard water is common across much of Texas; where it is, minerals build scale on heating elements, valves and spray parts, so descaling and filter changes matter more.

In coastal parts of Texas, salt air speeds up corrosion on coils, burners, fasteners and electrical connections, especially on equipment installed outdoors.

FAQ

Frequently Asked Questions

How much does True pizza prep table repair cost in Mathis, TX?

Most True pizza prep table repairs fall roughly between $150 and $450, depending on the part and labor involved. That is a national ballpark estimate; you get an exact quote after diagnosis and before any work starts.

Can you repair my True pizza prep table the same day?

Often, yes. Call (844) 442-1999 early in the day and we will try to schedule a same-day visit. Same-day service depends on technician availability and whether the part is in stock.

Is the repair guaranteed?

Yes. Completed repairs are covered by a 90-day parts-and-labor warranty. If the same problem comes back in that time, we come back and fix it.

Which brands do you service?

We work on all major brands, including Beverage-Air, True and Turbo Air.

Should I repair or replace my True pizza prep table?

A typical True pizza prep table lasts about 10 to 15 years. If yours is well within that range and the repair costs less than half the price of a new one, repair is usually the better value. Our technician will tell you honestly if replacement makes more sense.

Get your pizza prep table fixed in Mathis

Upfront quote before work starts · Parts matched to your model · 90-day warranty

Call now Book